The following precautions shall be taken for safe use of electric faucets

1. Three hole socket with ground wire shall be used for installing electric water faucet. Never connect to two hole socket without ground wire by yourself to prevent danger. If the line is not long enough, use the patch panel with over-current protection device.

2. When installing the electric faucet, a leakage protection switch must be installed to further ensure the safety of use. In general, the capacity of civil power grid is relatively small, so it should be avoided to use electric faucets together with high-power electrical appliances.

3. Electric faucets must be installed vertically, and accidents may occur if they are placed horizontally or upside down. Because the electric faucet is heated by the lower heating pipe. If the water flows around the heating pipe in the engine room to transfer heat, it will cause interference and burn the heating pipe if it is placed upside down, horizontally or obliquely.

4. Under normal circumstances, a qualified electric faucet product needs to pass more than 50 tests, including voltage withstand, leakage, insulation, low temperature freezing tests, etc., but only a few enterprises can really do these. Some products produced by smaller manufacturers have certain problems. The problems mainly focus on "abnormal test", that is, under extreme conditions, such as damage of protective parts, low temperature and other extreme conditions, some products produced by these small factories will have electric leakage, cracking and even fire during use, and some product identifications and product descriptions are incomplete or incompletely matched. Therefore, you must purchase products with formal brands and CCC certification, and ask for shopping vouchers.

5. During installation, professional technicians should be invited to operate, and reliable grounding must be provided; Water must be supplied before use, and electricity can be supplied after the water is discharged smoothly; When not in use, pull out the power plug as much as possible. It is in an environment below zero centigrade in winter. Pay more attention to safety.

6. It is strictly forbidden to connect the outlet nozzle of the electric faucet with the outlet nozzle not configured by the manufacturer. This is because the design and configuration of the nozzle are related to the power and temperature rise flow. Once changed, the original internal design will be destroyed, causing functional obstacles.

7. The electric faucet shall be stopped immediately in case of accident. When using the electric faucet, if you find that the indicator light does not give hot water and the sound is abnormal, you must stop using it immediately, turn off the power, contact the manufacturer's maintenance personnel in time, ask professional personnel to repair it, and do not disassemble it by yourself.

The principle of electric faucets is to use electricity to heat water, and the combination of electricity and water always makes people worry about electricity leakage. After reading the above precautions for safe use of electric faucets, will friends still have such worries? In fact, they are only qualified products, which are used correctly, and the problems they worry about generally do not occur.

You should pay special attention when using electric faucets. The water should not be too hot, or it will easily burn your hands and body. You also need to check whether your faucet has been repaired.